DPConverterBodyC<class ProcT> - Data conversion body.

User Documentation

Centre for Vision, Speech & Signal Processing

Comments:
The actualy implements the conversion between two class types.

Parent Classes:

DPConverterBaseBodyC

Typedefs:

typedef ProcT::ProcInputT InT;
typedef ProcT::ProcOutputT OutT;

Variables:

Methods:

DPConverterBodyC(const ProcT & inst,RealT ncost = 1): Constructor.
const type_info & ProcType() const: Get type of process
DPProcessBaseC CreateProc() const: Create an instance of this converter.
DPIPortBaseC CreateIStream(const DPIPortBaseC & inp) const: Create instance of process.
DPOPortBaseC CreateOStream(const DPOPortBaseC & outp) const: Create instance of process.
RCAbstractC Apply(const DPProcessBaseC & proc,SArray1dC<RCAbstractC> dat): Apply process using abstract data handle.
These should be RCWrap's of the actual data.
RCAbstractC Apply1(const DPProcessBaseC & proc,const RCAbstractC & arg): Apply process using abstract data handle.
Use only is you know the process uses 1 arg !
IntT Args() const: Number of args for process.
const type_info & ArgType(IntT i) const: Type of args.
const type_info & Output() const: Output type.
GraphTC<StringC,DPConverterBaseC> & ConvGraph(): Access conversion graph.
HashARC<StringC,GraphNodeHC<StringC,DPConverterBaseC>> & NodeTab(): Type -> Node mapping.
DListC<DPConverterBaseC> FindConversion(const type_info & from,const type_info & to,RealT & finalCost): Find a conversion.
If found the cost of conversion is put into finalCost.
DListC<DPConverterBaseC> FindConversion(const type_info & from,const type_info & to): Find a conversion.
RealT Cost() const: Get cost of conversion.
RCAbstractC Apply(const RCAbstractC & dat): Apply conversion.

#include "amma/DP/ProcInfo.hh"

const type_info & ProcType() const: Get type of process
IntT Args() const: Number of args for process.
const type_info & ArgType(IntT i) const: Type of args.
const type_info & Output() const: Output type.
DPProcessBaseC CreateProc() const: Create instance of process.
DPIPortBaseC CreateIStream(const DPIPortBaseC & inp) const: Create instance of process.
DPOPortBaseC CreateOStream(const DPOPortBaseC & outp) const: Create instance of process.
RCAbstractC Apply(const DPProcessBaseC & proc,SArray1dC<RCAbstractC> dat): Apply process using abstract data handle.
These should be RCWrap's of the actual data.
RCAbstractC Apply1(const DPProcessBaseC & proc,const RCAbstractC & arg): Apply process using abstract data handle.
Use only is you know the process uses 1 arg !
RCAbstractC Apply2(const DPProcessBaseC & proc,const RCAbstractC & arg1,const RCAbstractC & arg2): Apply process using abstract data handle.
Use only is you know the process uses 2 args !
DListC<DPProcInfoC> & Procs(): List of process types.

#include "amma/DP/Entity.hh"

BooleanT Save(ostream & out) const: Save to ostream.
BodyRefCounterVC & Copy() const: Creat a copy of this object.

#include "amma/BRefCntV.hh"

BodyRefCounterVC & Copy() const: Creat a copy of this object.
BooleanT operator==(const BodyRefCounterVC & oth) const: Compair identitys.
BooleanT operator!=(const BodyRefCounterVC & oth) const: Compair identitys.
BooleanT Save(ostream & out) const: Save to ostream.

#include "amma/BRefCnt.hh"

void AddReference(): Another reference to the object has been created.
void RemoveReference(): One reference to the object was deleted.
Locking scheme -------------- The object is possible to lock (to make constant). The scheme assumes that the object is created, it can be locked, after that it can only be destroyed. The locked object cannot be unlocked. This locking scheme is very useful during debugging, using assert() function, when it is necassary to check that object is treated as constant and the constancy is not violated by any casting or passing through the copy constructor of shared objects.
void SetConst(void) const: This locks the object.
Often objects you wish to lock are already const.
void SetConst(void): This locks the object.
BooleanT IsConst(void) const: Returns TRUE if the object is locked, ie. it is assumed to be constant.
BooleanT IsNotConst(void) const: Returns TRUE if the object is unlocked.
ie. there is no special information if the object is constant or not. Counter state information -------------------------
BooleanT ToBeDeleted() const: Returns TRUE if there is only one reference to the object and the whole object or its reference counting part can be deleted.
BooleanT ToBeDeletedRemoveIgnoreNoRemove(): Decrement refrence by 1 return true if this leaves no refrences to the object.
BooleanT ToBeDeletedRemove(): Decrement refrence by 1 return true if this leaves no refrences to the object. This also checks the NoRemove flag.
BooleanT BodyMightBeDeleted() const: Returns TRUE if the reference counted part of the object can be deleted, ie. flag NOREMOVE is false .
BooleanT IsCountZero() const: Are there any refrences left ?
BooleanT BRCPtrCanDeleteObject() const: Used by BRRCPtrC to establish if an object has ZERO refrences and can be deleted.
IntT Count() const: Returns the current state of the counter, ie. how many references to this object exist.
const BodyRefCounterC & operator=(const BodyRefCounterC & b): It has not meaning to assign object 'b' to this object because it would destroy a history of the object which is counted. So this is a dummy function.
BooleanT IsValidObject() const: Test if object is valid.
When amma check is disabled this always returns true.
BooleanT UserBitTest(IntT x) const: Test user flag.
void UserBitSet(IntT x,BooleanT setit = TRUE): Test user flag.
void UserBitZero(IntT x): Set bit to zero.
void ReportBRCError(char * Msg): Report error, used in BRCPtrC.
UIntT Hash() const: Hash on address of object.

#include "amma/RefCBase.hh"

LabelT Label() const: Returns the label of this reference counter.
The member function is useful mainly to recognize objects during debugging. The value of the label is uniquely defined pointer.

Programmer:Charles Galambos, Documentation by CxxDoc: Tue Mar 20 10:48:08 2001

DPConverterBodyC<class ProcT>

Data conversion body.

include	"amma/DP/Converter.hh"
User Level:	Default
Library:	DataConv
Example:	exMethodIO.cc
Section:	Data Processing Basic Types.IO
In Scope:	std